I explain to him that mine has both working lights and that it returns the pinging i'm doing to it. I hate to say this, but I talked with a tech at the site I got my hub at and he says he thinks the hubs are getting fried. The Message Updating Image should appear, do not interrupt it. Once loading process is complete and it appears things have stopped, wait 5 minutes more and Reboot with Rear Switch. If you have not set up the receiver yet Set up your satellites and Scan when you have proper Sat Lock. If pointing to 119W, Click on CH 101 picture must come in as it is a Free Channel. If you have Picture on CH 101, click CH 122 and wait for Picture. if after a few Minutes there is no Picture then go to Ip Config. If still no Picture after 5 minutes, please ask for help in the Forums Discussions Section pertaining to this Receiver.
The New Bin 515 Upgrades the I-Hub Firmware Via the USB port, no longer uses the Wiznet. Download the newest Receiver File commencing with Bin 515.
But before loading Bin 515 the I-hub needs to be loaded with I-Hub V2.2 Steps taken in this order. Click Search again and you should see the Ver 2.2 on the top Left, the Boardlist filled in, Ips Filled in and Port #1920 7. Click on CH 101 make certain you still have Picture 9.
and are going to channels that are available then yes..
I'd remmond loading an older IHUB firmware, get the IPConfig working then upload 1.4.
Now go to channel 200 and wait and see if you get picture there.... So unless the folks who came up with this firmware update can think of a way around this issue, I see no other option other theas sure SV would over come all issue and it would be the one way one could continue on in this hobby.
I do not condone, recommend, nor do I practice the theft of any signal from any Provider of Satellite signal, txsgent Jlayne, Welcome to the Site. I had to be in the first thosuand sent out as I was sure SV would over come all issue and it would be the one way one could continue on in this hobby. good luck, txsgent Anything I discuss on the subject of satellites, is strictly, hypothetical and in theory, and on an educational basis. Seems that there is just something in a batch of hubs that is having this issue. thanks guys., but still have no channels have dish 500 and got echo7 and echo 8 but still don't get anything on them like i had one i first got this thing i had all channels and lost them then bouhgt the ihub hoping it would fix my problem but it has not anymore help please i could use all i get before i turn this thing into a boat anchor....... I am awaiting an RMA and hope that my seller will be willing to exchange it and send one Pre-flashed with 1.4.. I factory reset like I used to back to the factory 103 file and then loaded the 209 file. When you update files are you supposed to disconnect the IHUB? If I try going back to 206 I can get into IP config and my settings are still good. I DO NOT condone or contribute to illegal piracy tv!!!!!! Is only 2 bucks a month, and helps keep the site going.... I have gotten no results on getting the hub out of the Ver82 glich. I post my theories only for testing information ONLY.. I have tried a least 10 different methods 10 times over with either a failed to load or upload complete message.Special Thanks To A friend to "PBP" Tech007 C/P There is a lot of confusion going on here since the New Bin was released.